Let us take the hassle out of pool cleaning with our weekly & monthly services Call: (203)340-6874

With spring here, and so many of us isolating at home amid the Coronavirus lockdown many people will be looking to open their swimming pools for a source of relaxation, exercise and enjoyment.

But is it safe to share your home swimming pool?  Does chlorine, bromine etc.. kill Coronavirus / Covid 19?

According to CDC (Centers for Disease Control and Prevention):

“There is no evidence that COVID-19 can be spread to humans through the use of pools and hot tubs. Proper operation, maintenance, and disinfection (e.g., with chlorine and bromine) of pools and hot tubs should remove or inactivate the virus that causes COVID-19.”

Of course, you should still consider keeping distance between one another if you can, around 6ft.  It’s also not a bad idea to shower before you get in the swimming pool to keep the pool as sanitized as possible and give the chemicals the best chance to do their job.

CDC officials say this coronavirus is thought to spread mainly from person-to-person. It spreads between people who are in close contact (within about 6 feet) with one another and through respiratory droplets produced when an infected person coughs or sneezes, according to the CDC.

Those who are unwell or suspect they may have Coronavirus should refrain from swimming if others are to use the same pool.

As always you should check your pool chemicals regularly to ensure that your swimming pool remains healthy.

 

ParameterMinIdealMaxPool Type
Free Chlorine (ppm or mg/L) 1.0 2.0 – 4.0 5.0 Pools, Waterparks
Free Chlorine (ppm or mg/L) 2.0 3.0 – 5.0 10.0 Spas
Combined Chlorine (ppm or mg/L) 0 0 0.4 Pools, Waterparks
Combined Chlorine (ppm or mg/L) 0 0 0.5 Spas
Total Bromine (ppm or mg/L) 2.0 4.0 – 6.0 10.0 All Types
PHMB (ppm or mg/L) 30 30 – 50 50 All Types
ph 7.2 7.4 – 7.6 7.8 All Types
Total Alkalinity as CaCO3 (ppm or mg/L) 60 80 – 100*
100 – 120**
180 All Types
Total Dissolved Solids (ppm or mg/L) NA NA 1500 over start-up All Types
Calcium Hardness as CaCO3 (ppm or mg/L) 150 200 – 400 1,000 Pools, Waterparks
Calcium Hardness as CaCO3 (ppm or mg/L) 100 150 – 250 800 Spas
Heavy Metals (ppm or mg/L) None None None All Types
Visible Algae None None None All Types
Bacteria None None Local Code All Types
Cyanuric Acid (ppm or mg/L) **** 30 – 50 **** All Types
Temperature °F/°C 78°F
(25.5°C)
80.5°F
(26.9°C)
82°F
(27.8°C)
Competition Pools
Temperature °F/°C 104°F Spas
Temperature °F/°C Personal Preference 104°F Other Pools
Ozone (ppm or mg/L) 0.1 over 8-hr. time wtd. avg. All Types
ORP Calibrate to Disinfectant Level **** Calibrate to Disinfectant Level **** Calibrate to Disinfectant Level **** All Types

 

*For calcium hyphchlorite, lithium hypochlorite, or sodium hypochlorite
**For sodium dichlor, trichlor, chlorine, gas, BCDMH
***Start-up includes the TDS contribution of salt found in chlorine generating systems
****Dictated by local codes. Typically 100 ppm(mg/L). (Some codes are higher, some are lower)
*****Some local codes may dictate a minimum and maximum

© National Swimming Pool Foundation 2017

 

 

You can help to keep your swimming pool clean and safe to use with regular cleaning from a local swimming pool contractor.  In most cases, your pool contractor will not require any contact with you.  Like many other contractors, this is true for Aqua Pro Pool & Spa Service who often turn up at customers home’s to clean their pools while they’re out.

No Comment

Comments are closed.